LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood, Lids [Cabriolet] >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer, Removing And Installing >> Adjusting Buffer, Removing And Installing, A4 Sedan, A5 Coupe And A5 Cabriolet >> Rear Lid Adjusting Buffer

Rear Lid Adjusting Buffer

GWWA55-11285Courtesy of AUDI OF AMERICA, LLC

Removing 

-- Loosen the rear lid lower trim panel near the adjusting buffer. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Turn the adjusting buffer -1- counter-clockwise -arrow- and remove it.

Installing 

Install in reverse order of removal and note the following:

-- Check the seal -2- between the adjusting buffer and the rear lid for damage.

-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .

scientia non olet · About LEMON Manuals