Body Adjusting Buffer

Courtesy of AUDI OF AMERICA, LLC

Removing 

-- Turn the adjusting buffer -1- counter-clockwise -arrow- to remove.

-- Remove the adjusting buffer locking mechanism -2- from the threaded pin.

Installing 

Install in reverse order of removal and note the following:

TIP:

To secure the adjusting buffer, the Pop Rivet Screw: WHT 005 180  must be inserted using the Pop Rivet Pliers: VAG1765C  and Pop Rivet Pliers - Supplement Pieces VAG1765C/2. Refer to the appropriate Service Information. The >>infomedia search<< can be used here to search for the Pop Rivet Screw: WHT 005 180  in the respective article.

-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .