Battery -A- / RADIO / FUSES / WIRING HARNESSES OVERVIEW

Fig 1: Exploded View Of Wiring Harnesses

Courtesy of AUDI OF AMERICA, LLC

• A -  Battery -A-
  • Installation position, Disconnecting. Refer to BATTERY, DISCONNECTING AND CONNECTING .
• B -  Radio, Telephone
  • Installation position, removing and installing. Refer to Communication .
• C -  Wiring Harness
  • Must be made
  • Positive wire (terminal 30) 2.5 diameter, red
  • Ground wire (terminal 31) 2.5 diameter, brown
  • Positive wire (terminal 15a) 1.5 diameter, black
• D -  Fuse Panel
  • Next to the Battery -A-
• E -  Terminal 15a
  • Always clipped on terminal 15a output
  • Wire must be protected
  • Fuse maximum 15 A
• F -  To the Starter -B-
  • Standard wire
• G -  Body Ground
  • Directly next to the Battery -A-
• H -  Transmitting/Receiving Antenna
  • For required antenna component locations and transmitting powers, refer to the tables. Refer to TRANSMITTER POWER OUTPUT AND ANTENNA COMPONENT LOCATIONS, A5 CABRIOLET FROM 11/7/2016 .
• J -  Antenna Ground
  • Proper and durable connection/corrosion protection
• K -  Shielded Antenna Wire
  • Wire with coaxial connector
• L -  Positive Connection
  • Secure red wire with cable shoe A6-2.5 under the nut
  • If possible, route wiring harness separately
• M -  Negative Wire
  • Secure brown wire with cable shoe A6-2.5 under the nut
  • If possible, route wiring harness separately