LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> TT Quattro S >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension [Coupe] >> 42 Rear Suspension >> Wheel Bearing And Trailing Arm >> Overview - Trailing Arm >> Bonded Rubber Bushing Installation Position:

Bonded Rubber Bushing Installation Position:

Fig 1: Positioning Bonded Rubber Bushing On Trailing Arm
GWWN42-10503Courtesy of AUDI OF AMERICA, LLC

Position the bonded rubber bushing on the trailing arm so that the marked line -arrows- is between the raised areas -1-.

NOTE:

Make absolutely sure that the bonded rubber bushing is in the correct installation position in relation to the trailing arm socket.

scientia non olet · About LEMON Manuals