Sliding Bar Ball, Installing

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Installing

CAUTION:

Risk of Injuring the Eyes Due to the Sliding Bar Ball Springing Out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

Fig 1: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in direction of -arrow A- using the : T40191 and hold.

-- Push the sliding bar -3- in direction of -arrow B-.