Camshaft, Removing And Installing, Engine With One Camshaft Adjuster: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Assembly Tool : T10352B , Assembly Tool : T10352/3 , Assembly Tool : T10352/4
- Locking Pin (3 pc.): T40011
- Chain Tensioner Lever: T40243
- Wrench - 21mm: T40263
- Adapter: T40266
- Tensioner Locking Tool: T40267
- Camshaft Locks: T40271
- Camshaft Lock - Component 1: T40271/1
- Camshaft Lock: T40271/2
- Adapter: T40314
- Sealant. Refer to the Parts Information.