Cylinder Head, Removing And Installing: Removing

Preliminary work may be required depending on the model. Refer to the appropriate Service Information .

-- Remove the spark plugs with the : 3122B  .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Fig 1: Cylinder Head Loosening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cylinder head bolts with the : T10070  or : T40270  in the sequence -1 through 10-.

• All hoses and line connections must be loosened.

-- Remove the cylinder head.

-- Lay the cylinder head on a soft surface, such as foam.

• Seal the open channels of the intake and exhaust tract with a clean cloth or with completely clean plugs from the : VAS6122  .