Special Tools

Special tools and workshop equipment required 

• Crank Shaft Seal Installer - Guide Piece :T10122/6A  from Seal Installer - Crankshaft :T10122B 
  Fig 1: Assembly Device

  Courtesy of AUDI OF AMERICA, LLC
• Guide Piece to Crankshaft Seal Install Kit - Guide Piece :T10122/1  from Seal Installer - Crankshaft :T10122B 
• Locking Pin :T10060A 
  Fig 2: Identifying Locking Pin

  Courtesy of AUDI OF AMERICA, LLC
• Counterhold - Vibration Damper :T10355 
  Fig 3: Counterhold - Vibration Damper T10355

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer, Intermediate Shaft :T10356/1 
  Fig 4: Identifying Seal Installer

  Courtesy of AUDI OF AMERICA, LLC
• Piston Installation Tool :T40347 
• Vibration Damper Assembly Tool :T10531 
  Fig 5: Assembly Tool Set T10531

  Courtesy of AUDI OF AMERICA, LLC
• Vibration Damper Assembly Tool - Counterhold Tool :T10531/1 
• Vibration Damper Assembly Tool - Tensioning Pins :T10531/2 
• Vibration Damper Assembly Tool - Turning Over Tool :T10531/3 
• Vibration Damper Assembly Tool - Knurled Nut :T10531/4 
• Torx Bit - T40 :T10545 
  Fig 6: Torx Bit - T40

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Sealing Flange Guide Sleeve :T20097 
  Fig 7: Identifying Sealing Flange Guide Sleeve

  Courtesy of AUDI OF AMERICA, LLC
• Wrench - 21mm :T40263 
  Fig 8: Identifying Wrench - 21mm

  Courtesy of AUDI OF AMERICA, LLC
• Adapter :T40314 
  Fig 9: Adapter T40314

  Courtesy of AUDI OF AMERICA, LLC
• Funnel :T40347 
  Fig 10: Funnel :T40347

  Courtesy of AUDI OF AMERICA, LLC
• Internal Puller :VAS251605  (was Kukko 21/2)
  Fig 11: Internal Puller

  Courtesy of AUDI OF AMERICA, LLC
• Counter Support :VAS251621  (was Kukko 22/1)
  Fig 12: Counter Support

  Courtesy of AUDI OF AMERICA, LLC
• Cylinder Dial Bore Gauge :VAS6078 
• Dial Gauge - 0-10mm :VAS6079 
  Fig 13: Dial Gauge

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge - 0-10mm :VAS6079 
  Fig 14: Dial Gauge

  Courtesy of AUDI OF AMERICA, LLC
• Bearing Installer - Bearing Press Piece :VW207C 
  Fig 15: Identifying Bearing Installer

  Courtesy of AUDI OF AMERICA, LLC
• Pilot Drift :VW222A 
  Fig 16: Identifying Pilot Drift

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge Holder :VW387 
  Fig 17: Dial Gauge Holder

  Courtesy of AUDI OF AMERICA, LLC
• Flywheel Retainer :3067 
  Fig 18: Identifying Pin Type Wrench

  Courtesy of AUDI OF AMERICA, LLC