Exhaust Gas Temperature Sensor, Removing And Installing: Removing

-- Loosen the center underbody trim panel from the inside and slightly lower. Refer to UNDERBODY TRIM PANELS, REMOVING AND INSTALLING .

Particulate Filter Differential Temperature Sensor -GX41- :

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and arrows- and remove the bracket.

-- Remove, disconnect and free up the connector -1- from the bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the exhaust gas temperature sensor -arrows-.

Particulate Filter Differential Temperature Sensor 2 -GX42- :

Courtesy of AUDI OF AMERICA, LLC

-- Remove, disconnect and free up the connector -1- from the bracket.

-- Remove the exhaust gas temperature sensor -arrow-.