LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> TT Quattro S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Assembly (Servicing - 4-Cylinder 2.0L 4V TFSI Engine (Ea 888 Generation III)) [Coupe] >> 10 Engine Assembly >> Engine Cover >> Engine Cover, Removing And Installing

Engine Cover, Removing And Installing

Removal, Version 1: 

GWWA10-11913Courtesy of AUDI OF AMERICA, LLC

-- Carefully pull the engine cover off the retaining pins one after the other -arrows-. Do not pull sharply on the engine cover or pull it to one side.

Removal, Version 2: 

GWWA10-11714Courtesy of AUDI OF AMERICA, LLC

-- Carefully pull the engine cover off the retaining pins one after the other -arrows-. Do not pull sharply on the engine cover or pull it to one side.

Installing 

-- To prevent damage to the engine cover, do not hit it with a fist or a tool.

-- Position the engine cover while paying attention to the oil filler tube and oil dipstick.

-- Press the engine cover into the rubber grommets on the left side first, then into the ones on the right side.

scientia non olet · About LEMON Manuals