Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING, VERSION 2: Removing

-- Remove the left front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Remove the connector -2- from the bracket, disconnect it, and free up the wire.

Fig 1: Secondary Air Injection Pump Motor -V101- Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Press the release buttons on both sides to remove the lines -1- from the Secondary Air Injection Pump Motor -V101-.

-- Remove the nuts -arrows- and the Secondary Air Injection Pump Motor -V101- -3-.