Overview - Secondary Air System

Fig 1: Exploded View Of Secondary Air System

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 9 Nm
O-Ring
- Check for damage
- Not available separately, delivered with -item 17-
- Coat with engine oil
O-Ring
- Check for damage
- Not available separately, delivered with -item 4-
- Coat with engine oil
Secondary Air Injection Sensor 1 -G609-
- Removing and installing. Refer to Secondary Air Injection Sensor 1 -G609-, REMOVING AND INSTALLING .
O-Ring
- Check for damage
- Not available separately, delivered with -item 16-
- coat with engine oil
Air Filter Housing
- Overview. Refer to AIR FILTER .
O-Ring
- Check for damage
- Not available separately, delivered with -item 16-
- Coat with engine oil
Secondary Air Injection Pump Motor -V101-
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING .
Bracket
- On body
- There are different versions. Refer to the Parts Information.
Nut
- 8 Nm
Nut
- 8 Nm
Bracket
- For the Secondary Air Injection Pump Motor -V101-
- There are different versions. Refer to the Parts Information.
Nut
- 8 Nm
Rubber Bushing
O-Ring
- Check for damage
- Not available separately, delivered with -item 17-
- Coat with engine oil
Suction Line
- From the air filter housing to the Secondary Air Injection Pump Motor -V101-
- There are different versions. Refer to the Parts Information.
Pressure Line
- From the Secondary Air Injection Solenoid Valve -N112- to the Secondary Air Injection Pump Motor -V101-
- There are different versions. Refer to the Parts Information.
Secondary Air Injection Solenoid Valve -N112-
- Do not disconnect from the flange.
- Replace completely with the flange.
- Removing and installing. Refer to Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING .
Seal
- Always replace after removing