Left Seal, Replacing: Installing

Fig 1: Identifying Oil Seal

Courtesy of AUDI OF AMERICA, LLC

-- Coat the outer edge and sealing lips on the new seal with transmission fluid.

• Installation position: open side of the seal faces the transmission.

-- Immediately mount the seal by hand and push it in as far as possible so that it is secure in the transmission housing.

-- Drive the seal in all the way using the : T10457  and do not tilt the seal while doing so.

Courtesy of AUDI OF AMERICA, LLC

-- Install the left drive axle. Refer to DRIVE AXLE, REMOVING AND INSTALLING .

-- Transmission Fluid Level, Checking and Filling. Refer to TRANSMISSION FLUID LEVEL, CHECKING .