LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> TT Quattro RS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 52 (Cylinder Head, VALVETRAIN (Servicing - 4-Cylinder 2.0L 4V TFSI Engine (Ea 888 Generation III)) [Roadster]) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Balance Shaft Drive Chain, Removing And Installing >> Balance Shaft Drive Chain, Removing And Installing, Engine With One Camshaft Adjuster >> Removing

Balance Shaft Drive Chain, Removing And Installing, Engine With One Camshaft Adjuster: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING, ENGINE WITH ONE CAMSHAFT ADJUSTER .

-- Remove the bolts -arrows-.

Fig 1: Bolts And Chain Tensioner
GWWA15-11492Courtesy of AUDI OF AMERICA, LLC

-- Remove the chain tensioner -1- for camshaft timing chain.

-- Remove the guide rail -3-.

Fig 2: Balance Shaft Timing Chain, Tensioning Rail And Guide Rails
GWWA15-10462Courtesy of AUDI OF AMERICA, LLC

-- Remove the balance shaft drive chain.