Overview - SUBFRAME Mount
WARNING: This page is about a different variant/trim than selected.
- 1 -
Engine Support
- Removing and Installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
- 2 -
Engine Mount
- With support arm
- Removing and Installing. Refer to SUBFRAME MOUNT .
- 3, 4, 5 -
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT
- 6 -
Bracket
- Equipped on some models
- 7, 8, 9 -
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT
- 10 -
Pendulum Support
- Removing and Installing. Refer to SUBFRAME MOUNT .
- 11 -
Bolt
- 130 Nm +90°
- Replace after removing
- 12, 13 -
Bolt
- 60 Nm +90°
- Replace after removing
- 14 -
Bolt
- 60 Nm +90°
- Replace after removing
- 15 -
Bolt
- 50 Nm +90°
- Replace after removing
- 16 -
Transmission Mount
- Removing and Installing. Refer to SUBFRAME MOUNT .