Overview - Exhaust Temperature Regulation
WARNING: This page is about a different variant/trim than selected.
- Post-Particulate Filter Temperature Sensor -G527- or Exhaust Gas Temperature Sensor 4 -G648-
- 45 Nm
- Designation in the wiring diagram depends on the model
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- Nut
- 9 Nm
- Pre-Particulate Filter Temperature Sensor -G506- or Exhaust Gas Temperature Sensor 3 -G495-
- 45 Nm
- Designation in the wiring diagram depends on the model
- Removing and Installing. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .
- Oxygen Sensor After Catalytic Converter -G130- with Heater for Oxygen Sensor 1 After Catalytic Converter -Z29- or Oxygen Sensor 1 After Catalytic Converter -GX7-
- Designation in the wiring diagram depends on the model
- Removing and Installing. Refer to -item 4) Oxygen Sensor After Catalytic Converter -G130- with Heater for Oxygen Sensor 1 After Catalytic Converter -Z29- or Oxygen Sensor 1 After Catalytic Converter -GX7- .
- Heated Oxygen Sensor -G39- with Oxygen Sensor Heater -Z19- or Oxygen Sensor 1 Before Catalytic Converter -GX10-
- Designation in the wiring diagram depends on the model
- Removing and Installing. Refer to -item 5) Heated Oxygen Sensor -G39- with Oxygen Sensor Heater -Z19- or Oxygen Sensor 1 Before Catalytic Converter -GX10- .
- Bolt
- Tightening specification. Refer to -item 6) Bolt
- Exhaust Pressure Sensor 1 -G450-
- Removing and Installing. Refer to -item 7) Exhaust Pressure Sensor 1 -G450- .
- Bolt
- Refer to -item 8) Bolt
- Pressure Lines
- Heat Shield
- Nut
- Tightening specification. Refer to -item 11) Nut
- Bolt
- Tightening specification. Refer to -item 12) Bolt
- Bolt
- Tightening specification. Refer to -item 13) Bolt
- Bolt
- Tightening specification. Refer to -item 14) Bolt
- Bolt
- Tightening specification. Refer to -item 15) Bolt
- Bracket
- For the pressure line
- Union Nut
- Tightening specification. Refer to -item 17) Union Nut
- Union Nut
- Tightening specification. Refer to -item 18) Union Nut