2020 Vehicle Condition Report

WARNING: This page is about a different car, the 2020 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

All Vehicles Audi Vehicle Condition Report


_{Stock Number}		_{Dealer Number}		_{R.O. Number}

_VIN				_Model

√ all completed items

Initial Vehicle Inspection
Complete the following checks within 2 business days (48 hours) of receiving a vehicle
□	Remove full body cover (if installed) following TSB 2009967. Check for transportation damage >>Note: This is a two-person task<<		□	Set tires to maximum recommended tire pressures listed on the B-pillar doorjamb, and store tire pressure values in Car / System menu. (Unless it is a sold unit awaiting customer pick up. If so, set the tire pressures to the "Normal Load Condition Tire Pressures". Refer to MY 2020 NORMAL LOAD CONDITION TIRE PRESSURES .)
□	Remove transportation wheel covers (if installed) and check for transportation damage.		□	Perform a battery test and attach the results to this article
□	Verify all keys are included		□	Must fuel with 91 Octane or higher (S3, RS 3, S4, S5, S6, S7, S8, SQ5, Q7, TTS & TT RS)
□	Verify the plastic Audi connect Vehicle Code Tag is included (e-tron, A4, S4, A5, S5, RS 5, A6, S6, A7, S7, A8, Q5, Q7, Q8)		□	Inspect body for paint defects and damage. Report any damage immediately and arrange for repair as soon as possible
□	Inspect painted surfaces / molding / glass


I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards.


_{Signature / Title}			_{Completion Date}