Coolant Pump, Removing And Installing: Removing
Depending on the model preliminary work may be required. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Place the container of the : VAS5014 or the : VAS6208 underneath.
-- Disconnect the vacuum hose -1-.
CAUTION:
Risk of destroying the ribbed belt pulley for the coolant pump due to impact or pressure.
- When removing the coolant pump pay attention that the ribbed belt pulley does not make contact anywhere.
- When removing the vacuum hoses do not support tools on the ribbed belt pulley.
-- Push the engine/transmission assembly slightly to the left side.
-- Remove the bolts -arrows- through the holes in the ribbed belt pulley, and remove the coolant pump.