LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 67 (Lubrication (Servicing - 4-Cylinder 2.0L 4V TFSI Engine (Ea 888 Generation III)) [Coupe]) >> 17 Lubrication >> Engine Oil Cooler >> Mechanical Switch Valve, Removing And Installing >> Removing

Mechanical Switch Valve, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Remove the mechanical switch valve -1- from the sub-assembly bracket in direction of -arrow-.

Fig 1: Identifying Mechanical Switch Valve
GWWA17-10918Courtesy of AUDI OF AMERICA, LLC