Turbocharger Vacuum Diaphragm, Replacing: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Loosen the clamps -1 and 2-.

Courtesy of AUDI OF AMERICA, LLC

-- Press the release buttons on both sides and disconnect the hose -3- for the crankcase ventilation on the air duct pipe.

-- Remove the bolt -arrow- and the air duct pipe.

-- Remove the vacuum hose -2- from the vacuum diaphragm -3- ; do not damage it.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clamp -1- and control rod from the turbocharger operating lever.

-- Remove the nuts -arrows- and then remove the vacuum diaphragm -3-.