Turbocharger Recirculating Valve -N249-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Turbocharger Recirculating Valve

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

Replace the O-ring after removing.
Installation position: the tab -2- on the Turbocharger Recirculation Valve -N249- must be inserted in the opening -1- on the intake tube.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .