Oil Pump, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Trim Removal Wedge:3409
- Crankshaft Adapter:T03003
- Oil Pump Alignment Plate:T03005A
- Locking Pin (3 pc.):T40011
- Crankshaft Locking Pin:T40069
- Camshaft Lock:T40264 Camshaft Lock - Adapter:T40264/2A
Tools, Preparing
The camshafts are secured with the : T40264/2A in "TDC".
-- If only one :T40264/2 is available, the lower bar -arrow- must be separated from the :T40264/2 .
Tools, Preparing:
-- When only the tool Crankshaft Adapter:T03003A is available the pins must be separated so that it can be placed on the vibration damper.