Oil Pan Upper Section, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Seal Installer - Valve Stem Seal Tool Adapter Plates:2036/1 from the Seal Installer - Valve Stem Seal Tool:2036
- Locking Pins:T03006
- Counterhold - Multiple Use:T10172A with Counterhold - Multiple Use - Adapter:T10172/9
- Crankshaft Locking Pin:T40069
- Crankshaft Adapter:T03003A
- Protective Eyewear
- Hand Drill with Plastic Brush Attachment
- Sealant. Refer to the Parts Information.
Tools, Preparing:
-- When only the tool Crankshaft Adapter:T03003 is available the pins must be separated so that it can be placed on the vibration damper.