Special Tools
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Spark Plug Removal Tool:3122B
- Compression Tester Kit:VAG1763
- Compression Tester Kit - Adapter 5A:VAG1381/5A
- Fuel Injection Gauge Kit - Adapter VAG1381/1:VAG1381/1
- Vehicle Diagnostic Tester
Special tools and workshop equipment required
- Polydrive Bit Drive Socket:T10070 or commercially available socket XZN M12, at least 140 mm
- Crankshaft Adapter:T03003
- Locking Pins:T03006
- Locking Pin (3 pc.):T40011
- Crankshaft Locking Pin:T40069
- Camshaft Spacer:T40191
- Camshaft Lock :T40264/2A
- Exhaust side: Fitting Tool:T40376/2
- Torque Wrench 1332 Insert - Open Ring Wrench - 24mm:VAG1332/9
- Valve Keeper Tool Kit:VAS5161A with Valve Keeper Tool Kit - Guide Plate 2.5L TFSI:VAS5161A/39
- Dial Gauge - 0-10mm:VAS6079
- Engine and Gearbox Bracket VAS6095A:VAS6095A
- Engine Bung Set:VAS6122
- Hose Clip Pliers:VAS6362
- Cylinder Head Tensioning Device:VAS6419
- Electronic Torque Wrench 3-60Nm:VAS6583
- Pliers - Valve Seal:VAS6770
- Seal Installer - Drive Axle:VW195
- Dial Gauge Holder:VW387
- Press Piece - 60mm:VW415A
- Camshaft Installer Kit - Sleeve:3241/4
- Puller - Valve Seal:3364
- Intake side: Seal Installer - Valve Stem:3365
- Not Illustrated:
- Key:T40297
- Camshaft Lock:T40264/2A