Oil Spray Jets, Removing And Installing: Removing

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the :T40069  .

Fig 1: Turning Crankshaft To TDC

Courtesy of AUDI OF AMERICA, LLC

• The notch -1- in the :T03003A  is positioned vertically to the oil pan sealing surface.
• The marking -2- on the vibration damper is positioned opposite the marking -3- on the sealing flange.

-- When turning the crankshaft, only turn it in the direction of engine rotation -arrow-.

-- Turn the crankshaft with :T03003A  -arrow- until the respective bolt is accessible.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the pressure relief valve -2- using the :T10545  .

-- Remove the oil spray jet -1-.