Vibration Damper, Removing And Installing: Notes
Special tools and workshop equipment required
- Counterhold - Vibration Damper :T10355
- Wrench - 21mm :T40263
- Adapter :T40314
- Vibration Damper Assembly Tool :T10531
Individual Components of the Vibration Damper Assembly Tool :T10531 :
- Vibration Damper Assembly Tool - Counterhold Tool :T10531/1
- Vibration Damper Assembly Tool - Tensioning Pins :T10531/2
- Vibration Damper Assembly Tool - Turning Over Tool :T10531/3
- Vibration Damper Assembly Tool - Knurled Nut :T10531/4
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt the chain sprocket must be secured to the crankshaft as described as follows.