Overview - Sill Panel
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Sill Panel
- Press on until it engages audibly
- Stretch the door seal lip over.
- Removing and Installing. Refer to REAR SILL PANEL, REMOVING AND INSTALLING .
- Switch Trim
- Only 7 seats
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .
- Clip
- Quantity: 3
- Insert in the sill panel
- Replace damaged or deformed clips
- Clip
- Insert in the sill panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool:T40280 . To install, insert into the sill panel strip.
- Replace damaged or deformed clips
- Clip
- Quantity: 2
- Insert in the body
- Replace damaged or deformed clips
- Clip
- Quantity: 8
- Insert in the sill panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool:T40280 . To install, insert into the sill panel strip.
- Replace damaged or deformed clips
- Front Sill Panel
- Press on until it engages audibly
- Stretch the door seal lip over.
- Removing and Installing. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .