Turbocharger, Removing And Installing, Cylinder Bank 2 (Left): Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the reinforcement brace. Refer to OVERVIEW - LOCK CARRIER .

-- Loosen the hose clamps -1 and 2- and remove the air duct hose.

Courtesy of AUDI

-- Remove the connector -1- for the Oxygen Sensor 2 Before Catalytic Converter -GX11- from the bracket, disconnect it and free up the wire.

Courtesy of AUDI

All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .