LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Crankshaft, Cylinder Block (Servicing 8-Cylinder 4.0L 4V TFSI Engine Ea825)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing >> Removing

A/C Compressor Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles excluding RSQ8 / SQ8 / SQ7:

-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

Audi RSQ8 / SQ8 / SQ7:

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

Continuation for All Vehicles:

Fig 1: A/C Compressor Bracket -1- - Tightening Specifications and Sequence
GWWA13-11304Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.