Overview - Ignition System
Courtesy of AUDI OF AMERICA, LLC
- O-Ring
- Replace if damaged or leaking
- Camshaft Position Sensor 3 -G300-
- Bolt
- Bolt
- 23 Nm
- Tightening specifications affect the function of the knock sensor
- Knock Sensor 1 -G61-
- Bolt
- 23 Nm
- Tightening specifications affect the function of the knock sensor
- Knock Sensor 2 -G66-
- O-Ring
- Replace if damaged or leaking
- Camshaft Position Sensor -G40-
- Bolt
- Spark Plug
- Replacement interval. Refer to the appropriate Maintenance Tables.
- Tightening specification. Refer to SPARK PLUGS, REPLACING
- Spark Plug Connectors
- Ignition Coil
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Ignition Coil 5 with Power Output Stage -N323-
- Ignition Coil 6 with Power Output Stage -N324-
- Ignition Coil 7 -N325-
- Ignition Coil 8 -N326-
- Bolt
- O-Ring
- Replace if damaged or leaking
- O-Ring
- Replace if damaged or leaking
- Engine Speed Sensor -G28-
- Removing and Installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- After replacing perform the listed adaptation in the 0001 - Engine Electronics Functions "0001 - Steps after replacing components" using the Vehicle Diagnostic Tester.
- Bolt
- O-Ring
- Replace if damaged or leaking
- Camshaft Position Sensor 2 -G163-
- Bolt
- Knock Sensor 4 -G199-
- Bolt
- 23 Nm
- Tightening specifications affect the function of the knock sensor
- Bolt
- 23 Nm
- Tightening specifications affect the function of the knock sensor
- Knock Sensor 3 -G198-
- Bolt
- Camshaft Position Sensor 4 -G301-
- O-Ring
- Replace if damaged or leaking