Overview - Cylinder Head

All components are described under: OVERVIEW - CYLINDER HEAD .

Wiring Duct on Front Engine, Cylinder Bank 1 (Right) - Tightening Specification

Fig 1: Component Location: on the Front of the Engine, Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -1- to 9 Nm.

Wiring Duct on Front Engine, Cylinder Bank 2 (Left) - Tightening Specification

Fig 2: Component Location: on the Front of the Engine, Cylinder Bank 2 (Left)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- to 9 Nm.

Wiring Harness Bracket on Cylinder Head Bank 2 (Left) - Tightening Specification

Fig 3: Wiring Harness Bracket on Cylinder Head Bank 2 (Left) - Tightening Specification

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- to 9 Nm.