Sensor Wheel, Checking
CAUTION:
Do not place the sensor wheel near magnets (for example inspection lamp base, or speakers).
There is a risk of destroying the sensor wheel by magnetic force.
- Before installing the drive plate/flywheel or sensor wheel, check the function of the sensor wheel.
Special tools and workshop equipment required
- Gauge - Sender Wheel:T10473
Procedure
- Sensor wheel removed. Refer to SENSOR WHEEL, REMOVING AND INSTALLING .
-- Check the entire circumference of the sensor wheel using the Gauge - Sender Wheel:T10473 as shown.
Sensor wheel test diagram
A - Sensor Wheel OK
B - Sensor Wheel Faulty