Crankshaft, Removing And Installing: Notes

Special tools and workshop equipment required 

• Puller - Unit Injector:T10055 
  Fig 1: Puller - Unit Injector

  Courtesy of AUDI
• Screwdriver:T10248  , not illustrated
• Locking Pin (3 pc.):T40011 
  Fig 2: Identifying Locking Pin T40011

  Courtesy of AUDI
• Extracting Tool :T40332 

  Courtesy of AUDI

• Locking Tool:T40362  , not illustrated

Prepare the Extracting Tool : T40332 

Courtesy of AUDI

-- Tighten the pull rod -1- with the bolts -arrows- as shown on the puller cross bar Extracting Tool: T40332  .

-- Remove the threaded pins -2- for later assembly of the tool.