Overview - Socket And Towing Recognition Control Module

Courtesy of AUDI OF AMERICA, LLC

1. Towing Recognition Control Module -J345-
   • Removing and installing. Refer to Towing Recognition Control Module -J345-, REMOVING AND INSTALLING .
2. Frame
   • For the Towing Recognition Control Module -J345-
3. Information Label
   • On the body on the left rear
4. Power Pivoting Trailer Hitch Button -E474-
   • Removing and Installing. Refer to Loading Sill Lowering Control Head -E682- /Power Pivoting Trailer Hitch Button -E474-, REMOVING AND INSTALLING .
5. Trailer Hitch Bend Angle Sensor -G820-
   • Removing and installing. Refer to OVERVIEW - TRAILER HITCH .
6. Trailer Socket -U10-
   • Removing and installing. Refer to Trailer Hitch .
7. Connector