Selector Lever Handle, Removing and Installing: Removing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
- Ignition switched off
 Courtesy of AUDI OF AMERICA, LLC
|
- Remove the selector lever handle upper section -1- upward in direction of -arrows-.
- Carefully pry out the selector lever boot on the side using the Trim Removal Wedge -3409- in direction of -arrow-.
- Remove the bolt -2-.
- Pull the selector lever handle lower section -1- upward.