Condensation Water Drain, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install both condensation water drain hoses -B- so that they are not twisted or crushed (different versions for the left and right side). Refer to the Parts Information.
-- Insert the condensation water drain hose -B- and push with pretension into the floor panel -F-.
-- Make sure the carpet does not push up against the condensation water drain hose -B- when installing.
-- If a condensation water drain hose -B- fits too loose on the heater and A/C unit condensation water drain -A-, secure it with a clamp, for example, so that it cannot slide off.