Left Footwell Vent Temperature Sensor -G261-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
LHD vehicle
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
RHD vehicles
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
Continuation for all vehicles
-- Grab behind the instrument panel and release and disconnect the connector -A-.
-- Turn the sensor -B- 90° and remove from the heater and A/C unit air duct -D-.