LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ5 Prestige >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood, Lids (Fy & 87) >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Removing And Installing >> Rear Lid, Removing And Installing >> Removing

Rear Lid, Removing And Installing: Removing

-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connectors and the antenna wires and free up the wiring harness.

-- Remove the gas-filled strut  . Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Equipped on some models: remove the rear lid motor. Refer to Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, REMOVING AND INSTALLING .

-- Remove the bolts -2-.

GWWA55-11329Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear lid -1-.