Spoiler, Removing And Installing: Removing
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connectors -1 and 3-.
-- Free up the cable grommets -2- by releasing the retainers -arrows-.
-- Remove the nuts -2 and 3- and the bolt -1-.
-- Close the rear lid.
-- Remove the spoiler -4- with the :T10383/1 from the rear lid.
-- If the spoiler is to be replaced, also remove the following components:
- High-mounted brake lamp. Refer to HIGH-MOUNTED BRAKE LAMP BULB, REMOVING AND INSTALLING .