Drip Rail, Removing And Installing
Special tools and workshop equipment required
- Hand drill
- 5 mm drill bit
Drip Rail, Removing
-- Starting at the bottom, carefully remove the drip rail -1- upward -arrow-.
Drip Rail Clamping Strip, Removing
-- Drill out the rivet heads -arrows- and drive out the rivet shafts.
-- Remove the clamping strip -1-.
Installing
-- Push in the drip rail -2- starting at the top in the retaining strip -5- and clip -1- all the way.
3 - Windshield
4 - Roof
6 - A-Pillar
Installation Instructions. Refer to OVERVIEW - DRIP RAIL .