Overview - Roof Railing

Courtesy of AUDI OF AMERICA, LLC

1. Seal
2. Bolt
   • 8 Nm
   • Quantity: 2
3. Roof Railing
   • Removing and Installing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
4. Housing Upper Section
5. Roof Rack Recognition Sensor -G625-
6. Housing Lower Section
7. Wire
8. Nut
   • Quantity: 4
   • Insert with locking fluid. Refer to the Parts Information.
   • Tightening specification and sequence. Refer to Fig 1.
9. Lifter
   • 0.5 Nm
   • Quantity: 4
   • Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
   • Install with locking compound. Refer to the Parts Information for the locking compound.

Roof Railing - Tightening Specification and Sequence

Fig 1: Roof Railing - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts to 10 Nm in the sequence -2, 3, 4, 5 and 1-.