Air Intake Housing From Heater And A/C Unit, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Check the insulation -E- in the evaporator housing -D- of the heater and A/C unit for damage, contamination (odor) and the correct installation.
-- Check the connection points between the air intake housing -C-, and the evaporator housing -D- for the heater and A/C unit (groove/spring connection) for damage, and coat the connection points lightly with silicone grease, for example. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Install the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Re-install the remaining removed parts in reverse order.