Air Intake Housing From Heater And A/C Unit, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Check the insulation -E- in the evaporator housing -D- of the heater and A/C unit for damage, contamination (odor) and the correct installation.
-- Check the connection points between the air intake housing -C-, nd the evaporator housing -D- for the heater and A/C unit (groove/spring connection) for damage, and coat the connection points lightly with silicone grease, for example. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Install the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Re-install the remaining removed parts in reverse order.