Turbocharger, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Free up the wiring harness -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -arrows-.

-- Remove the connection and hose -1- for the crankcase ventilation to do so press the release buttons on both sides.

-- Move the connection to the side.

-- Press the release buttons on both sides and disconnect the EVAP system hose -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- for the air guide pipe -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -3- and the line -2- for the EVAP system and move to the side.

All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .