Lower Tail Lamp, Removing And Installing: Removing
-- Turn the light switch to position "0".
-- To protect the paint in the area around the cap, tape it off with a soft cloth.
-- Push the cap -2- inward in direction of -arrow- from the outside.
-- Remove the cap and let it hang.
-- Remove the bolt -1-.
-- Remove the bolt -1-.
-- Using the scraper, pivot the lower tail lamp -2- slightly out of the bumper cover in direction of -arrow A- on the inside.
-- With the scraper release lever positioned at the outside, push the lower tail lamp out of the bumper cover in direction of -arrow B-. Doing so will detach the retainer -1-.
-- Remove the lower tail lamp from the bumper cover and disconnect the connector.