Gear Set, Disassembling And Assembling: Notes
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Bearing Installer - Differential Bearing: 40-21
- Press Piece - Trailing Arm: 2010
- Inductive Heater: VAS6414
- Press Plate: VW402
- Press Piece - Multiple Use: VW412
- Press Piece - Multiple Use: VW519
- Thrust Piece: T10431/1
- Gearbox Assembly Tool: T40213A
- Socket - Xzn 18mm: T10162A
- Press Piece - Multiple Use: 30-11
- Press Piece - 31.5mm: VW418A
- Hydraulic Press: VAS6178
- Thrust Piece: T10205/13 from the Bearing Installer - Wheel Hub/Bearing Kit: T10205A
- Press Piece - Multiple Use: VW426
- Bearing Installer - Multiple Use: 32-111
- Press Piece - Rod: VW407
- Bearing Installer - Bearing Press Plate: T10084A
- Press Plate: VW401
- Press Piece - Multiple Use: 40-105
- Valve Guide/Clutch Release Push Rod Seal Drift: 10-206
- Press Piece - Rod: VW408A
- Exhaust Pipe Wedge Set: 3140A
- Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A
- Two-Arm Puller: VAS251001
- Extracting Tool: T40413
Disassembling
- Gear set removed. Refer to TRANSMISSION, DISASSEMBLING AND ASSEMBLING .
- Oil pan removed -item 5- OVERVIEW - GEAR SET, VEHICLES WITHOUT SELF-LOCKING CENTER DIFFERENTIAL => List Item: Oil Pan.