Component Location Overview - Seals
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Input Shaft Seal
- In clutch cover: replacing. Refer to INPUT SHAFT SEAL, REPLACING, CLUTCH COVER .
- in clutch housing: replacing. Refer to INPUT SHAFT SEAL, REPLACING, CLUTCH HOUSING .
- Transmission
- Left Flange Shaft Seal
- Replacing. Refer to LEFT SEAL, REPLACING .
- O-Ring
- Replace after removing
- Right Flange Shaft Seal
- Removing and Installing. Refer to RIGHT SEAL, REPLACING .
- Final Drive Cover
- Tightening specification and sequence. Refer to Figure.
- Transmission Output Shaft Seal
- Only for AWD vehicles
- Replacing. Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING .
- Parking Lock Shaft Seal
- Replacing. Refer to SHIFT MECHANISM or the appropriate service information. .