LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Final Drive, Differential (7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL)) >> 39 Final Drive, Differential >> Final Drive >> Adjustment Overview - Final Drive >> Notes

Adjustment Overview - Final Drive: Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Pinion Shaft and Ring Gear, Adjusting

Drivetrain Adjustment

GWWA39-10805Courtesy of AUDI OF AMERICA, LLC
  1. 1 -

    Ring Gear with Differential

  2. 2 -

    Pinion with Installed Double Angular Contact Ball Bearing, Preload Sleeve and Circlip

  3. 3 -

    Double Angular Contact Ball Bearing

  4. M -

    Dimension of the Center Differential to the Outer Race of the Double Angular Contact Ball Bearing

  5. R -

    Actual Dimension between Ring Gear Axis and Face of Drive Pinion in Position of Quietest Running

    • The dimension "R" generally is for all dimensions 60.00 mm. There is no individual dimension.
    • The dimension "R" is then adjusted on the Measuring Set - Adjustable Master Gauge: VW385/30  .
  6. Vo -

    Hypoid Offset

Adjusting Shim Position

GWWA39-10806Courtesy of AUDI OF AMERICA, LLC
  1. S1 -

    Ring Gear Adjustment Shim in Final Drive Cover

  2. S2 -

    Ring Gear Shim inside the Transmission Housing

  3. S3 -

    Shim for Positioning Drive Pinion in Transmission Housing

  4. S4 -

    Shim for Positioning the Double Angular Contact Ball Bearing/Pinion in the Transmission Housing