Right Flange Shaft, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Circlip Pliers: VAS5503A
- Used Oil Collection and Extraction Unit: SMN372500
- Puller - Flanged Shaft: T10037
- Sealing Grease. Refer to the Parts Information.
Removing
- The transmission is installed.
-- Remove the right drive axle. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
-- Place the Used Oil Collection and Extraction Unit: SMN372500 under the transmission.
-- Remove right flange shaft by fastening Puller - Flanged Shaft: T10037 to transmission housing -arrow-.