LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Final Drive, Differential (7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL)) >> 39 Final Drive, Differential >> Center Differential >> Center Differential, Removing And Installing >> Removing

Center Differential, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2022 Audi SQ5, 2022 Audi Q5 e, 2022 Audi Q5, 2021 Audi Q5 e, and 2021 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driveshaft. Refer to the appropriate service information. .

-- Drain the transmission fluid. Refer to the appropriate service information. .

CAUTION:

Transmission components could be damaged.

  • The self-locking center differential is pretensioned with a pressure spring.
  • Carefully remove the center differential housing from the transmission toward the rear. Otherwise the center differential could fall out of the transmission.

-- Remove the bolts from the self-locking center differential housing in the following sequence: -11 to 1-.

Fig 1: Center Differential Housing - Tightening Sequence
GWWA39-10856Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil guide piece.

GWWA39-10857Courtesy of AUDI OF AMERICA, LLC

-- Secure the center differential -1- so it does not fall out or remove it toward the rear from the input shaft.

Fig 2: Identifying Center Differential -1- At Input Shaft
GWWA39-10416Courtesy of AUDI OF AMERICA, LLC